Cisco Systems MGX 8230 manual Release 1.1.31, Part Number 78-11215-03 Rev. B0, May

Chapter 6 Card and Service Configuration

ATM Universal Service Module (AUSM)

•EgSrvRate is the egress service rate. Without IMA, the range is as follows:

–T1, 10–3622 cells per second

–E1, 10–4528 cells per second

–clear E1, 10–4830 cells per second

For IMA, multiply the line rate by the number of links.

•EgrPcUtil is the percent utilization on the egress. The range is 1–127. The default is 0.

cnfupcvbr has the same syntax and parameters as cnfupcabr

cnfupcvbr or cnfupcabr <port.vpi.vci> <enable> <pcr[0+1]> <cdvt[0+1]> <scr> <scr_police> <mbs> <IngPcUtil> <EgSrvRate> <EgPcUtil> <clp_tag>

•port.vpi.vci identifies the connection.

•enable is the enabled/disable for UPC: 1=Disable, 2=Enable.

• pcr is the peak cell rate. Without IMA, the range is as follows:

–T1, 10–3622 cells per second

–E1, 10–4528 cells per second

–clear E1, 10–4830 cells per second

For IMA, multiply the line rate by the number of links.

•cdvt cdvt[0+1] is the cell delay variation tolerance for cells with CLP=[0+1]. The range is 1–250000 micro seconds.

• scr is the peak cell rate. Without IMA, the range is as follows:

–T1, 10–3622 cells per second

–E1, 10–4528 cells per second

–clear E1, 10–4830 cells per second

For IMA, multiply the line rate by the number of links.

•scr_police specifies the type of scr policing: 1= CLP[0] cells, 2=CLP[0+1] cells, and 3=no SCR policing.

•mbs is the maximum burst size: the range is 1–5000 cells.

•IngPcUtil is the percent utilization on the egress. The range is 1–127. The default is 0.

	Cisco MGX 8230 Edge Concentrator Installation and Configuration
Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001		6-19