Cisco Systems MGX 8230 manual Conformance, Nebs, Emc

Appendix A Technical Specifications

Conformance

Table A-34 Electromagnetic Compatibility and Immunity (continued)

Category	AC-Powered (110/220 VAC		DC-Powered (-48V)
Australia EMC	VCCI Class A		not applicable
CE mark	EMC: EN 55022 Class A		not applicable
Immunity	•	EN 50082-1 (generic
		immunity)
	•	EN 61000-4-2 through -5
NEBS	not applicable		EMC:
(EMC)			GR-1089-CORE Class A (radiated and
			magnetic fields) and line conductance.
			GR-1089-CORE ESD (8 KV contact) RS
			(10 V/meter) CS (clause 3.3.3)
			European Telecom Standards (ETSI) for Surge:
			ETSI 300 386-1, DC power leads only
			(200 VAC–1000 VAC)

The levels for the mandatory CE mark immunity tests are

•For IEC 61000-4-2 (ESD), the test level is 4.

•For IEC 61000-4-3 (RS), the test level is 3.

•For IEC 61000-4-4 (EFT), the test level is 4.

•For IEC 61000-4-5 (Surge), the test level is 3.

Conformance

This section contains standards compliance information for features on the MGX 8230.

ATM UNI

The ATM specifications for the User-Network Interface to which the MGX 8850 complies are

•ATM Forum–ATM UNI, V3.1, 1995.

•ITU Recommendation I.361–B-ISDN ATM Layer Specification, March 1993.

•ITU Recommendation I.371–Traffic Control and Congestion Control in B-ISDN, March 1993.

•ITU Recommendation I.432–B-ISDN User Network Interface—Physical Interface Specification, March 1993.

•ANSI T1E1.2/94-002R1, Draft–B-ISDN and DS1/ATM User Network Interfaces: Physical Layer Specification.

•ANSI T1E1.2/94-020, Draft–B-ISDN Customer Installation Interfaces, Physical Media Dependent Specification.

	Cisco MGX 8230 Edge Concentrator Installation and Configuration
A-28	Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001