Cisco Systems manual MGX 8230 Management, Cell Bus Distribution

Chapter 1 Introducing the MGX 8230

MGX 8230 System Overview

Figure 1-8 Cell Bus Distribution

Left side of chassis					Right side of chassis
7							14
6										13
5										12
4										11
3										10
2					PXM						9
1					PXM						8
	CB0	CB6	CB1	CB5		CB2	CB4	CB3	CB7

Table 1-1 Cell Bus Distribution

38376

Left Side Chassis

Right Side Chassis

Physical Slot #

1

2

3

4

5

6

7

10

11

12

13

14

Slot ID Address

1s

2s

9

A

B

C

D

9

A

B

C

D

CB0_A/B

x

CB1_A/B

x

CB2_A/B

x

CB3_A/B

x

CB4_A/B

x

CB5_A/B

x

CB6_A/B

x

CB7_A

x

x

CB7_B

x

x

MGX 8230 Management

Firmware on each card determines the functions and operations of the module. This firmware can be upgraded by downloading new firmware with a TFTP application running on a workstation or a PC.

The current status and configuration parameters of the modules reside in a Management Information Base (MIB). The MIB is updated by the firmware in the modules whenever changes to the module status or configuration occur. The MIB can be interrogated using SNMP commands.

The MGX 8230 supports the following user interface applications:

•Cisco WAN Manager (formerly StrataView Plus): a Graphical User Interface (GUI) application for connection management. This application enables operations, administration, and maintenance of WAN-multiservice networks.

•CiscoView: a GUI application for hardware configuration.

	Cisco MGX 8230 Edge Concentrator Installation and Configuration
Release 1.1.31, Part Number 78-11215-03 Rev. B0, May 2001		1-11