Cisco Systems OL-4015-08 Connection: G.SHDSL

Chapter4 Edit Interface/Connection
Connection: G.SHDSL
4-28
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
•auto—Configure the ADSL line after auto-negotiating with the DSLAM
located at the Central Office.
•etsi—European Telecommunications Standards Institute mode.
•multimode—Mode chosen by firmware for best operating condition on
digital subscriber line (DSL). The final mode can be either ETSI mode, or
standard Annex-B mode depending on current DSLAM setting.
Authentication
Click this button if you need to enter CHAP or PAP authentication information.
Dynamic DNS
Enable dynamic DNS if you want to automatically update your DNS servers
whenever the WAN interface’s IP address changes.
Note This feature appears only if supported by your Cisco server’s IOS.
To choose a dynamic DNS method to use, do one of the following:
•Enter the name of an existing dynamic DNS method.
Enter the name in the Dynamic DNS Method field exactly as it appears in
the list in Configure > Additional Tasks > Dynamic DNS Methods.
•Choose an existing dynamic DNS method from a list.
Click the drop-down menu and choose to use an existing method. A window
with a list of existing dynamic DNS methods will open. This menu choice is
available only if there are existing dynamic DNS methods.
•Create a new dynamic DNS method.
Click the drop-down menu and choose to create a new dynamic DNS method.
To clear an associated dynamic DNS method from the interface, choose None
from the drop-down menu.
Connection: G.SHDSL
This window enables you to create or edit a G.SHDSL connection.