Chapter4 Edit Interface/Connection
Connection: G.SHDSL
4-30
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Static IP address
If you select Static IP address, enter the address that the interface will use, and the
subnet mask, or the network bits. Obtain this information from your service
provider or network administrator. For more information, refer to IP Addresses
and Subnet Masks.
Dynamic IP address
If you select Dynamic IP address, the interface will obtain an IP address from a
DHCP server on the network. If the DHCP server uses DHCP option 12, it sends
a host name for the router along with the IP address i t is to use. Check with your
service provider or network administrator to determine the host name sent.
IP Unnumbered
Select this option if you want the interface to share an IP address with an Ethernet
interface on the router. If you select this option, you must specify from the d rop
down list the Ethernet interface whose address you want to use.
IP Address for Remote Connection in Central Office
Enter the IP address of the gateway system to which this link will connect. This
IP address is supplied by the service provider or network administrator. The
gateway is the system that the router must connect to in order to access to the
Internet or to your organization’s WAN.
Equipment Type
Select one of the values below:
CPE
Customer premises equipment. If the encapsulation type is PPPoE, CPE is
automatically selected and the field is disabled.
CO
Central office.
Operating Mode
Select one of the values below: