CHAPTER
33-1
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
33
File Menu Commands
The following options are available from the Cisco Router and Security Device
Manager (SDM) File menu.

Save Running Config to PC

Saves the router’s running configuration file to a text file on the PC.

Deliver Configuration to Router

This window lets you deliver to the router any configuration changes that you
have made using SDM. Note that any changes to the configuration that you made
using SDM will not affect the router until you deliver the configuration.

Save Running Config to Router’s Startup Config

Check this check box to cause SDM to save the configuration shown in the
window to both the router running configuration file and the startup file. The
running configuration file is temporary—it is erased when the router is rebooted.
Saving the configuration to the router startup configuration causes the
configuration changes to be retained after a reboot.
If SDM is being used to configure a Cisco 7000 router, the check bo x Save
running config. to router's startup config. will be disabled if there are boot
network or boot host commands present with service config commands in the
running configuration.