Chapter4 Edit Interface/Connection
Connection: Serial Interface, Frame Relay Encapsulation
4-36
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Enter the name in the Dynamic DNS Method field exactly as it appears in
the list in Configure > Additional Tasks > Dynamic DNS Methods.
•Choose an existing dynamic DNS method from a list.
Click the drop-down menu and choose to use an existing method. A window
with a list of existing dynamic DNS methods will open. This menu choice is
available only if there are existing dynamic DNS methods.
•Create a new dynamic DNS method.
Click the drop-down menu and choose to create a new dynamic DNS method.
To clear an associated dynamic DNS method from the interface, choose None
from the drop-down menu.
Connection: Serial Interface, Frame Relay Encapsulation
Complete these fields if you are configuring a serial subinterface for Frame R elay
encapsulation. If you are editing a connection or creating a connecti on in the Edit
Interfaces and Connections window, the encapsulation is shown, but not editable.
If you need to change the encapsulation type, delete the connection , and recreate
it, using the encapsulation type you need.
Encapsulation
Frame Relay selected.
IP Address
Select either Static IP address or IP unnumbered.
IP Address
If you selected Static IP address, enter the IP address for this interface. Obtain
this value from your network administrator or service provider. For more
information, refer to IP Addresses and Subnet Masks.