Chapter3 Create Connection Wiza rds
How Do I...
3-30
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Step4 Click Edit.
The Connection tab appears.
Step5 Click Options.
The Edit Dialer Option dialog box appears.
Step6 If you want the router to establish the connection only when it recognizes specific
IP traffic, click the Filter traffic based on selected ACL radio button, and either
enter a rule (ACL) number that will identify which IP traffic should cause the
router to dial out, or click the ... button to browse the list of rules and select the
rule that you want to use to identify IP traffic from that list.
Step7 If you want to configure the router to end the connection when the connection is
idle, i.e., no traffic passes across it, for a specified amount of time, in the Idle
timeout field, enter the number of seconds the connectio n can remain idle before
the router ends the connection.
Step8 If you are editing an ISDN connection, and you would like to use your second B
channel only when the traffic on the first B channel exceeds a certain threshold,
check the Enable MultiLink PPP check box, then in the Load Threshold field,
enter a number between 1 and 255, where 255 equals 100% of bandwidth, that will
determine the threshold on the first B channel. When traffic on that channel
exceeds that threshold, it will cause the router to connect the second B channel.
In addition, in the Data direction field, you can choose whether this threshold
should apply to outbound or inbound traffic.
Step9 Click OK.
How Do I Edit a Radio Interface Configuration?
You must use the Wireless Application to edit an existing radio interface
configuration.
Step1 Click Configure on the SDM toolbar.
Step2 Click Interfaces and Connections in the left frame, and then click the Edit
Interface/Connection tab.