Chapter9 Easy VPN Remote
Edit Easy VPN Remote
9-84
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Name
The name given to this Easy VPN connection.
Mode
Choose client or network extension. In client mode, the VPN concentrator or
server assigns a single IP address to all traffic coming from the router; devices
outside the LAN have no direct access to devices on the LAN. In network
extension mode, the VPN concentrator or server does not substitute I P addresses,
and it presents a full routable network to the peers on the other end of the VPN
connection.
Details
Choose an Easy VPN Remote connection from the list to see the values of the
following settings for that connection.
Authentication
Choose digital certificates or preshared key. The preshared key option shows the
user group sharing the key.
Outside Interface
This is the interface that connects to the Easy VPN server or concentrator.
The connection is down. When an Easy VPN connection is down, the
Connect button enables you to activate the connection if manual
tunnel control is used.
The connection is being established.
Xauth Required—The Easy VPN server or concentrator requires an
XAuth login and password. Use the Login button to enter the login ID
and password and establish the connection.
Configuration Changed—The configuration for this connection has
been changed, and needs to be delivered to the router. If the
connection uses manual tunnel control, use the Connect button to
establish the connection.