Chapter13 IP Security
Transform Set
13-40
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
What Do You Want to Do?
Add or Edit Transform Set
Use this window to add or edit a transform set.
To obtain a description of the allowable transform combinations, and descriptions
of the transforms, click Allowable Transform Combinations.
Note •Not all routers support all transform sets (encryption ty pes). Unsupported
transform sets will not appear in the screen.
•Not all IOS images support all the transform sets that SDM supports.
Transform sets unsupported by the IOS image will not appear in the screen.
•If hardware encryption is turned on, only those transform sets supported by
both hardware encryption and the IOS image will appear in the screen.
•Easy VPN servers only support tunnel mode. Transport mode is not supported
by Easy VPN servers.
•Easy VPN Servers only support transform sets with ESP encryption. Easy
VPN servers do not support the AH algorithm.
If you want to: Do this:
Add a new transform set to the router’s
configuration.
Click Add, and create the transform set in the Add Transform
Set window.
Edit an existing transform set. Select the transform set, and click Edit. Then edit the
transform set in the Edit Transform Set window.
Note SDM Default transform sets are read-only and cannot
be edited.
Delete an existing transform set. Select the transform set, and click Delete.
Note SDM Default transform sets are read-only and cannot
be deleted.