Chapter5 Create Firewall
Advanced Firewall Configuration Wizard
5-6
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Advanced Firewall DMZ Service Configuration
This window allows you to view rule entries that specify which services available
inside the DMZ you want to make available through the router’s outside
interfaces. Traffic of the specified service types will be allowed through the
outside interfaces into the DMZ network.

DMZ Service Configuration

This area shows the DMZ service entries configured on the router.
Start IP Address
The first IP address in the range that specifies the hosts in the DMZ network.
End IP Address
The last IP address in the range that specifies the hosts in the DMZ network. If
there is no value listed in this column, the IP address in the Start IP address
column is presumed to be the only host in the DMZ network. The range can
specify a maximum of 254 hosts.
Service Type
The type of service, either Transmission Control Protocol (TCP) or Us er
Datagram Protocol (UDP).
Service
The name of the service, such as Telnet, or FTP, or a protocol number.

To configure a DMZ service entry:

Click Add, and create the entry in the DMZ Service Configuration window.

To edit a DMZ service entry:

Select the service entry, and click Edit. Then, edit the entry in the DMZ Service
Configuration window.