Chapter3 Create Connection Wiza rds
How Do I...
3-28
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
The interface is added to the pool of interfaces using NAT.
Step6 Review the Network Address Translation Rules in the NAT window. If you need
to add, delete, or modify a rule, click the appropriate button on the NAT window
to perform the configuration you need.
For more information, click the following links:
•Add or Edit Static Address Translation Rule: Inside to Outside
•Add or Edit Static Address Translation Rule: Outside to Inside
•Add or Edit Dynamic Address Translation Rule: Inside to Outside
•Add or Edit Dynamic Address Translation Rule: Outside to Inside
How Do I Configure NAT on an Unsupported Interface?
SDM can configure Network Address Translation (NAT) on an interface type
unsupported by SDM. Before you can configure the firewall, you must first use
the router CLI to configure the interface. The interface must have, at a minimum,
an IP address configured, and it must be working. To verify that the connection is
working, verify that the interface status is “Up.”
After you have configured the unsupported interface using the CLI, yo u can
configure NAT using SDM. The unsupported interface will appear as “Other” on
the router interface list.
How Do I Configure a Dynamic Routing Protocol?
To configure a dynamic routing protocol:
Step1 From the toolbar, click Configure.
Step2 From the left frame, click Routing.
Step3 In the Dynamic Routing group, click the dynamic routing protocol that you want
to configure.
Step4 Click Edit.