21-19
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Chapter21 Quality of Service
QoS Status
Bandwidth utilization is shown in Kbps.
•Total incoming and outgoing bytes for each traffic type
–
Incoming and outgoing bytes for each class defined under the traffic type
–
Incoming and outgoing bytes for each protocol for each class
If the value is more than 1,000,000, then the graph may show the bytes as a
multiple of 10^6. If the value is more than 1,000,000,000, then the graph may
show the bytes as a multiple of 10^9.
•Packets dropped statistics for each traffic type
Interface—IP/Mask—Slot/Port—Description
This area lists the interfaces with associated QoS policies, their IP addresses and
subnet masks, slot/port information if applicable, and available descriptions.
Select the interface that you want to monitor from this list.
View Interval
Select the interval at which statistics should be gathered:
•Now—Statistics are gathered when you click Start Monitoring.
•Every 1 minute—Statistics are gathered when you click Start Monitoring,
and refreshed at 1-minute intervals.
•Every 5 minutes—Statistics are gathered when you click Start Monitoring,
and refreshed at 5-minute intervals.
•Every 1 hour—Statistics are gathered when you click Start Monitoring, and
refreshed at 1-hour intervals.
Start Monitoring
Click to start monitoring QoS statistics.
Select QoS Parameters for Monitoring
Select the traffic direction and type of statistics you want to monitor.
Direction
Click either Input or Output.