Cisco Systems OL-4015-08 Connection: Analog Modem

4-47
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Chapter4 Edit Interface/Connection
Connection: Analog Modem
Connection: Analog Modem
Complete these fields if you are configuring an analog modem connection.
Because SDM supports only PPP encapsulation over an analog modem
connection, the encapsulation shown is not editable.
Encapsulation
PPP selected.
Remote Phone Number
Enter the phone number of the destination of the analo g modem connection.
Options
Click this button if you need to associate ACLs with a dialer list to identify
interesting traffic or enter timer settings.
Identifying interesting traffic will cause the router to dial out and create an active
connection only when the router detects interesting traffic.
Timer settings will cause the router to automatically disconnect a call after the
line is idle for the specified amount of time.
Clear Line
Click this button to clear the line. You should clear the line after creating an async
connection so that interesting traffic triggers the connection.
IP Address
Select either Static IP address, IP Unnumbered or IP Negotiated. If you select
Specify an IP address, complete the fields below.
IP Address
Enter the IP address for this point-to-point subinterface. Obtain this value from
your network administrator or service provider. For more information, re fer to IP
Addresses and Subnet Masks.