3-21
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Chapter3 Create Connection Wizards
Summary
•Crypto—A crypto map is applied to the interface on which the connection
was created. To delete the crypto map, click Configure; then click Interfaces
and Connections. Click the connection in the Interface List, then click Edit.
Click the Association tab; then in the VPN group, in the IPSec Policy field,
click None.
•EZVPN—An Easy VPN is applied to the interface on which the connection
was created. To delete the Easy VPN, click Configure; then click Interfaces
and Connections. Click the connection in the Interface List, then click Edit.
Click the Association tab; then in the VPN group, in the Easy VPN field,
click None.
•VPDN—VPDN commands that are required for a PPPoE configuration are
present in the router configuration. If there are any other PPPoE connections
configured on the router, do not delete the VPDN commands.
•ip tcp adjust mss—This command is applied to a LAN interface to adjust the
TCP maximum size. If there are any other PPPoE connections configured on
the router, do not delete this command.
•Backup connection—When a backup connection is configured for the
primary interface.To delete the backup association, click Configure, then
click Interfaces and Connections. Click the Backup interface in the
Interface List, then click Edit. Click the Backup tab; uncheck the Enable
Backup check box.
•PAT on Backup connection—PAT is configured on the backup interface. To
delete the PAT association, click Configure; then click NAT. Click the rule
associated with this connection, and then click Delete.
•Floating Default Route on Backup connection—The Backup interface is
configured with a floating default static route. To delete the floating static
route , click Configure; then click Routing. Click the floating static route in
the Static Routing table, and click Delete.
Summary
This screen displays a summary of the WAN link that you configured.You can
review this information, and if you need to change anything, you can click the
Back button to return to the screen on which you need to make changes.