19-35
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Chapter19 Intrusion Prevention Sy stem
IPS Rules
Enable Button
Click this button to enable IPS on the selected interface. You are able to specify
the traffic directions to which IPS is to be applied, and the ACLs to use to define
the type of traffic to examine. Enable or Edit IPS on an Interface has more
information.
Edit Button
Click this button to edit the IPS characteristics applied to the selected interface.
Disable Button
Click this button to disable IPS on the selected interface. A context menu shows
you the traffic directions on which IPS has been applied and you ca n select the
direction on which you want to disable IPS. If you disable IPS on an interface on
which it has been applied, SDM dissociates any IPS rules from the interface that
they were applied to.
Disable All Button
Click this button to disable IPS on all interfaces on which it has been enabled. If
you disable IPS on an interface on which it has been applied, SDM dissoci ates any
IPS rules from the interfaces that they were applied to.
Interface Name
The name of the interface, for example Serial0/0, or FE0/1.
IP
IP Address
This column can contain the following types of IP addresses:
•The configured IP address of the interface.
•DHCP Client—The interface receives an IP address from a Dynamic Host
Configuration Protocol (DHCP) server.
•Negotiated—The interface receives an IP address via negotiation with the
remote device.