Cisco Systems OL-4015-08 Add or Edit Address Pool

Chapter18 Network Address Translation
Network Address Translation Rules
18-16
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Address
This field contains the IP address range in the pool. Devices whos e IP addresses
match the access rule specified in the Add Address Translation rule window will
be given private IP addresses from this pool.
What do you want to do?
Note If SDM detects a previously-configured NAT address pool that uses the “type”
keyword, that address pool will be read-only and cannot be edited.
Add or Edit Address Pool
Use this window to specify an address pool for dynamic address translation, an
address for Port Address Translation (PAT), or a TCP load balancing rotary pool.
Pool Name
Enter the name of the address pool.
If you want to: Do this:
Add an address pool to the router’s
configuration.
Click Add, and configure the pool in the Add Address Pool
window.
If you want to use an existing pool as a template for the new
pool, select the existing pool, check Clone selected entry on
Add, and click Add.
Edit an existing address pool. Select the pool entry, click Edit, and edit the pool
configuration in the Edit Address Pool window.
Delete an address pool. Select the pool entry, click Delete, and confirm deletion in
the Warning box displayed.