18-15
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Chapter18 Network Addres s Translation
Network Address Translation Rules

Edit Route Map Entry

Use this window to edit the access list specified in a route map entry.
Name
A read-only field containing the name of the route map entry.
Seq No.
A read-only field containing the sequence number for the route map. When SDM
creates a route map, it automatically assigns it a sequence number.
Action
Either permit or deny. Route maps created by SDM are configured with the
permit keyword. If this field contains the value deny, the route map was created
using the CLI.
Access Lists
This area shows the access lists associated with this entry. The route map uses
these access lists to determine which traffic to protect from NAT translation.
To edit an access list in a route map entry:
Select the access list, and click Edit. Then, edit the access list in the windows
displayed.
Address Pools
The Address Pools window shows the configured address pools that can be used
in dynamic NAT translation.
Pool Name
This field contains the name of the address pool. Use this name to refer to the pool
when configuring a dynamic NAT rule.