Cisco Systems OL-4015-08 Select Ethernet Configuration Type, Connection: VLAN

Chapter4 Edit Interface/Connection
Select Ethernet Configuration Type
4-16
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Dissociate Current QoS Policy checkbox
Enabled when a QoS policy is associated with the interface. Check to dissociate
the currently associated policy from the interface.
Associate an existing QoS policy checkbox
Click to associate an existing policy, and then select the QoS policy from the list.
Select Ethernet Configuration Type
This window is displayed when you click on an interface in the Interfaces and
Connections window and SDM cannot determine whether it is configured as a
LAN interface or as a WAN interface. When you configure an interface using
SDM, you designate it as an inside or outside interface, and SDM adds a
descriptive comment to the configuration file based on your designation. If you
have configured an interface using the command-line interface (CLI), the
configuration will not include this descriptive comment, and SDM will not have
this information.
To indicate that the interface is a LAN interface:
Click LAN, and then click OK. SDM adds the comment line $ETH-LAN$ to the
interface’s configuration, and the interface appears in the LAN wizard window,
and appears with the designation Inside in the Interfaces and Connections
window.
To indicate that the interface is a WAN interface:
Click WAN, and then click OK. SDM adds the comment line $ETH-WAN$ to the
interface’s configuration, and the interface appears in the WAN wizard window,
and appears with the designation Outside in the Interfaces and Connections
window.
Connection: VLAN
This screen lets you configure a VLAN interface.