17-5
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Chapter17 Routing
Add or Edit an RIP Route
Add or Edit an RIP Route
Use this window to add or edit a Routing Internet Protocol ( RIP) route.
RIP Version
The values are RIP version 1, RIP version 2, and Default. Select the version
supported by the Cisco IOS image that the router is running. When you select
version 1, the router sends version 1 RIP packets and can receive version 1
packets. When you select version 2, the router sends version 2 RIP packets a nd
can receive version 2 packets. When you select Default, the router sends version
1 packets, and can receive both version 1 and version 2 RIP packets.
IP Network List
Enter the networks on which you want to enable RIP. Click Add to add a network.
Click Delete to delete a network from the list.
Available Interface List
The available interfaces are shown in this list.
Make Interface Passive
Check the box next to the interface if you do not want it to send updates to its
neighbor. The interface will still receive routing updates, however.
Add or Edit an OSPF Route
Use this window to add or edit an Open Shortest Path First (OSPF) route.
OSPF Process ID
This field is editable when OSPF is first enabled; it is disabled once OSPF routing
has been enabled. The process ID identifies the router ’s OSPF routing process to
other routers.