9-87
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Chapter9 Easy VPN Remote
Edit Easy VPN Remote
•The XAuth response is set to be requested from SDM or the router console
•The tunnel is waiting for XAuth credentials (the connection has been
initiated)
If the connection is set to automatic or traffic-based tunnel control, this button is
disabled.
What Do You Want to Do?
If you want to: Do this:
Create a new Easy VPN connection. Click Add in the Edit Easy VPN Remote window. Configure
the connection in the Add Easy VPN Remote window, and
click OK. Then click Connect in this window to connect to
the Easy VPN server.
Modify an existing Easy VPN
connection.
In the Edit Easy VPN Remote window, choose the connection
you want to modify and click Edit. You may also wish to
consult the following procedure:
•How Do I Edit an Existing Easy VPN Connection?
Delete an Easy VPN connection. In the Edit Easy VPN Remote window, choose the connection
you want to delete and click Delete.
Reset an established connection
between the router and a remote VPN
peer.
The connection is cleared and
reestablished.
Choose an active connection, and click Reset. The status
window that is displayed reports the success or failure of the
reset.