19-37
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Chapter19 Intrusion Prevention Sy stem
IPS Rules
Source/Destination—A network or host address, or any host or network.
Service—Type of service filtered. IP, TCP, UDP, IGMP, and ICMP services can
be filtered.
Log—Whether or not denied traffic is logged.
Options—Options configured using the CLI.
Description—Any description provided.
Enable or Edit IPS on an Interface
Use this window to select the interfaces on which you want to enable intrusion
detection, and to select the IPS filters that you want to use to specify the traffic to
be examined.

Both/Inbound/Outbound

Use these buttons to specify whether you are going to enable IPS on both inbound
and outbound traffic, only inbound traffic, or only outbound traffic.

Inbound Filter

(Optional) Enter the name or number of the access rule that specifies the inbound
traffic to be examined. The ACL that you specify appears in the IPS Rules
Configuration window when the interface with which it is associated is selected.
If you need to browse for the access rule or create a new one, click the ... button.
Permit source traffic.
Deny source traffic.