Chapter4 Edit Interface/Connection
Connection: (AUX Backup)
4-50
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Clear Line
Click this button to clear the line. You should clear the line after creating an async
connection so that interesting traffic triggers the connection.
IP Address
Select either Static IP address, IP Unnumbered or IP Negotiated. If you select
Specify an IP address, complete the fields below.
IP Address
Enter the IP address for this point-to-point subinterface. Obtain this value from
your network administrator or service provider. For more information, re fer to IP
Addresses and Subnet Masks.
Subnet Mask
Enter the subnet mask. The subnet mask specifies the portion of the IP address
that provides the network address. This value is synchronized with the network
bits. Obtain the value of the subnet mask or the network bits fr om your network
administrator or Internet service provider.
Subnet Bits
Alternatively, enter the network bits to specify how many bits in the IP address
provide the network address.
Backup Details
Click this button to display the Backup Configuration screen, which lets you
configure dial-backup information for this connection. This information is
mandatory for this type of connection, and an error will be displayed if you try to
complete the connection configuration without entering dial-backup
configuration information.
Authentication
Click this button if you need to enter CHAP or PAP authentication information.