Cisco Systems OL-4015-08 Date and Time Properties

23-3
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Chapter23 Router Properties
Date and Time: Clock Properties
Date/Time
You can see the router’s date and time settings on the right side of the SDM status
bar. The time and date settings in this part of the Clock Properties window is not
updated.
Router Time Source
This field can contain the following values:
•NTP. The router receives time information from an NTP server.
•User Configuration. The time and date values are set manually, via SDM or
the CLI.
•No time source. The router has not been configured with time or date settings.
Change Settings
Click to change the date and time settings on the router.
Date and Time Properties
Use this window to make router date and time settings. You can have SDM
synchronize settings with the PC, or you can make settings manually.
Synchronize with my local PC clock
Check to set up SDM to synchronize router date and time settings with the date
and time settings on the PC.
Synchronize
Click to have SDM perform a synchronization. SDM adjusts date and time
settings in this way only when you click Synchronize; it does not automatically
re synchronize with the PC during subsequent sessions. This button is disabled if
you have not checked Synchronize with my local PC clock.