Cisco Systems OL-4015-08 Write to Startup Config, Reset to Factory Defaults, File Management

Chapter33 File Menu Commands
Write to Startup Config
33-2
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Cancel
Click this button to discard the configuration change and close the SDM Deliver
to Router dialog box.
Save to File
Click this button to save the configuration changes shown in the window to a text
file.
Write to Startup Config
Writes the router’s running configuration file to the router startup configuration.
If SDM is being used to configure a Cisco 7000 router, this menu item will be
disabled if there are boot network or boot host commands present with
service config commands in the running configuration.
Reset to Factory Defaults
See Resetting to Factory Defaults.
File Management
This window allows you to view and manage the file system on your Cisco router
flash memory and on USB flash devices connected to that router. Only DOSFS
file systems can be viewed and managed in this window.
The left side of window displays an expandible tree representing the directory
system on your Cisco router flash memory and on USB flash devices connected
to that router.
The right side of the window displays a list of the names of the files and
directories found in the directory that is chosen in the left side of the window. It
also shows the size of each file in bytes, and the date and time each file and
directory was last modified.