Cisco Systems OL-4015-08 Add new connection

Chapter8 Site-to-Site VPN
Edit Site-to-Site VPN
8-58
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Delete Button
Click to delete a selected VPN connection
Test Tunnel.. Button
Click to test a selected VPN tunnel.The results of the test will be shown in another
window.
Clear Connection Button
Click to reset an established connection to a remote peer. This button is disabled
if you have selected a dynamic site-to-site VPN tunnel.
Generate Mirror..Button
Click to create a text file that captures the VPN configuration of the local router
so that a remote router can be given a VPN configuration that enable s it to
establish a VPN connection to the local router. This button is disabled if you have
selected a dynamic site-to-site VPN tunnel.
Note Any previously configured VPN connections detected by SDM that do not use
ISAKMP crypto maps will appear as read-only entries in the VPN connection
table and cannot be edited.
Add new connection
Use this window to add a new VPN connection between the local router and a
remote system, referred to as a peer. You create the VPN connection by
associating an IPSec policy with an interface.
To create a VPN connection:
Step1 Select the interface you want to use for the VPN from the Select Interface list.
Only interfaces that are not used in other VPN connections are shown in this list.