23-15
Cisco Router and Security Device Manager Version 2.2 User’s Guide
OL-4015-08
Chapter23 Router Properties
VTYs
SSH
Check this check box to enable the router to communicate to SSH clients.

Access Rule

You can associate access rules to filter inbound and outbound traffic on the vty
lines in the range.
Inbound
Enter the name or number of the access rule you want to filter inbound traffic, or
click the button and browse for the access rule.
Outbound
Enter the name or number of the access rule you want to filter inbound traffic, or
click the button and browse for the access rule.

Authentication/Authorization

These fields are visible when AAA is enabled on the router. AAA can be enabled
by clicking Additional Task s>AAA>Enable.
Authentication Policy
Select the authentication policy that you want to use for this vty line.
Authorization Policy
Select the authorization policy that you want to use for this vty line.
Configure Management Access Policies
Use this window to review existing management access policies and to select
policies for editing. Management access policies specify which networks and
hosts will be able to access the router’s command line interface. In the policy, you
can specify which protocols the host or network in the policy can use, and which
router interface will carry the management traffic.