TROUBLESHOOTING
Eaton 9170+ UPS (3–18 kVA) User's Guide S 164201393 Rev E www.eaton.com/powerquality 109
Alarms
Figure 61 shows a typical alarm display. Alarms are annunciated by a
constant Alarm LED and a constant beep. During alarm display,
button (A) silences the audible alarm, button (B) clears the alarm display,
and button (C) performs the normal Escape function to exit from the
alarm display. The button lets you scroll through all alarms.

S High AC Input

System

(A) (B) (C)
(Silence) (Clear) (ESC)
Figure 61. Typical System Active Alarm Display
Figure 62 shows a detailed alarm entry. Some alarms provide additional
information on the second line of the display to help identify the cause
of the alarm. The third line may also display a specific slot number
where the fault occurred. If the alarm is not specific to a slot number,
“System” appears on the display.

M Batt Test Failed 1

Open Cell

Slot 4

(A) (B) (C)
(Silence) (Clear) (ESC)
Figure 62. Detailed Alarm Entry
When the Eaton 9170+ UPS detects an alarm condition, the UPS
displays the alarm with the following indications:
SIlluminates the red LED next to the front panel display
SSounds an audible alarm
SDisplays an alarm message