Genicom 3600 manual Replacing the Power Switch/Circuit Breaker

3600 Printer Maintenance Manual

Replacing the Power Switch/Circuit Breaker

To replace the power switch and circuit breaker assembly, you will need the following parts and tools:

Note: The 220-volt printer uses a 1 amp power switch/circuit breaker and the 115-volt printer uses a 2 amp power switch/circuit breaker.

∙AC power switch/circuit breaker, Intermec Part No. 501273-001 (2A) or AC power switch/circuit breaker, Intermec Part No. 501273-002 (1A)

∙ESD grounding strap

∙Needlenose pliers

∙#2 Phillips screwdriver

To replace the power switch/circuit breaker

1.Switch off the printer power and remove the power cord.

2.Remove the media cover and the electronics cover.

3.Disconnect the two leads with push-on connectors attached to the power switch.

Rear	Power switch/
	circuit breaker
panel
	Transformer lead
	AC power plug lead
Tabs

3600M.063

5-32