Genicom 3600 manual Printer Maintenance Manual Printer Errors

3600 Printer Maintenance Manual

Printer Errors (continued)
Error Code	Problem	Solution
32	Non-immediate command or data	Allow the printer to empty the buffer contents before
	received after buffer full.	sending commands or data.
33	Invalid field delimiters.	Check for all pairs of field delimiters, and make sure both
		are numeric or both are alphanumeric.
34	Invalid escape command.	Correct the escape command syntax.
35	Invalid data shift command.	Correct the shift command syntax.
36	Invalid or undefined format	Verify that the format numbers are between 0 and 19.
	number.
37	Insufficient room in RAM to print	Reduce the number of data fields in the format.
	format.
38	Invalid or undefined field number.	Verify the field number in the label format.
41	Syntax error for program	Check the program command for proper syntax.
	commands.

42Insufficient room in RAM to store format.

43Too many fields in label format.

Empty the buffer contents. If the format still does not fit, delete some fields or other data from the format. You may have to remove or reduce the UDCs, formats, or fonts if necessary.

Note: Entering <ESC>m tells the host how much memory is installed and how much is available.

You can use up to 200 fields in a format and each field can use up to 250 characters. Reduce field size or delete some fields.

46	Undefined statement.	Check the statement syntax.
52	Invalid UDC/UDF bitmap cell	Verify that cell heights and widths are between 1 and 599,
	height/width or intercharacter	and that the intercharacter space is between 0 and 199.
	space.
53	Insufficient room in RAM to store	Remove or reduce formats, fonts, or UDCs.
	UDC or UDF.
54	Invalid UDC command syntax.	Correct the UDC command syntax.

4-8