Genicom 3600 manual Replacing the Lithium Battery, To replace the lithium battery

3600 Printer Maintenance Manual

Replacing the Lithium Battery

To replace the lithium battery, you will need the following parts and tools:

∙1.75AH 3.6V AA lithium battery, Intermec Part No. 586229

∙ESD grounding strap

∙#2 Phillips screwdriver

Warning

There is danger of explosion if the battery is incorrectly replaced. Replace

WARNING it only with the same or equivalent type battery recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.

Il y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du même type ou d’un type recommandé par le constructeur. Mettre au rébut les batteries usagées conformément aux instructions du fabricant.

To replace the lithium battery

Note: The printer will lose data if the battery fails or is removed. Before removing the battery, upload and save the fonts, formats, pages, graphics, and configuration settings.

1.Switch off the printer power and remove the power cord, the media cover, and the electronics cover.

2.Remove the old battery and install the new battery, matching the (+) and (-) ends of the battery with the (+) and (-) signs on the main PCB.

Lithium	Main PCB
battery

J9

Power

Alert

Empty/Pause

Feed/Pause

Intermec

3600

3600M.042

3. Install the covers and power cord. Check the printer for proper operation.

5-4