Genicom 3600 manual Removing the Media Cover, To remove the media cover

Preventive Maintenance 2

Removing the Media Cover

Most of the cleaning procedures require that you remove the media cover.

To remove the media cover

1.Place your fingers in the space at the lower center edge of the media cover and pull the bottom of the cover away from the base of the printer.

2.Grasp the front of the media cover and lift the front of the cover upward.

Power

Alert

Empty/Pause

Feed/Pause

Intermec

3600

2

3

Media cover

1

Media cover release (between the two notches)

3600M.010

3. Lift the media cover away from the printer.

2-5