Genicom 3600 manual Adjusting the Printhead Adjustment Lever for Print Quality

3600 Printer Maintenance Manual

Adjusting the Printhead Adjustment Lever for Print Quality

The printhead adjustment lever is located at the end of the printhead pivot bracket. It allows fine-tuning of the printhead fore/aft position. The printhead adjustment lever provides three stops forward movement of the printhead and three stops backward movement from center position in 0.006-inch increments.

To achieve the best print quality, raise the printhead with the printhead lift lever and position the printhead adjustment lever as shown in the illustration: from the rear, adjust clockwise/left to move the printhead forward, or adjust counterclockwise/right to move the printhead backward.

Printhead adjustment lever

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

I

O

printhead moves backward

	printhead
moves	forward

3600M.033

3-16