Genicom 3600 manual Printer Maintenance Manual Software Configuration, Print Quality

3600 Printer Maintenance Manual

Software Configuration

This three-label set lists current configuration parameters that are set from the host computer. It also lists defined pages, formats, graphics, fonts, and installed options. This label serves as a configuration reference as well as an alphanumeric and multiple label alignment and print test.

Program Version :	1.1	PRINT SPEED - 3.0 IPS	RIBBON SAVE - Disabled	BAUD RATE - 9600
Pages Defined :	0	IMAGE BANDS - 3	SELF STRIP - Disabled	DATA BITS - 7
Formats Defined :	0, 19	MAX LABEL LENGTH - 4 inches CUTTER - Disabled		MESSAGE LENGTH - 255
Fonts Defined :	0, 1, 2, 7, 20 21, 22, 23, 24,	LABEL STOCK - Inter- label gap DARK ADJUST - 0		PARITY - Even
	25, 30, 31, 32, 33, 34, 35, 36,
	37, 38, 39, 40, 41	MEDIA TYPE - Direct Thermal	X FORMS ADUST - 0	STOP BITS - 1
Graphics Defined :	none	MEDIA LENGTH - 0 inches	Y FORMS ADJUST - 10	PROTOCOL - Xon/Xoff No Status
		CHARACTER SET - US ASCII	LABEL REST POINT - 0	DEVICE ADDRESS - A
		TRANSLATION - Disabled	SENSITIVITY - 420	INTERNAL OPTIONS - none
		EMULATION - Disabled		EXTERNAL OPTIONS - Self Strip
		LABEL RETRACT - Enabled

1 2 3 4

ONOFF

5 6 7 8 1 2 3 4

ONOFF

5 6 7 8

3600M.024

Print Quality

This label contains bar codes and human readable fields that you can use to determine whether the printer you are testing is attaining the best print quality possible. If you notice problems with the print quality, check and perform the adjustment and alignment procedures provided in this chapter to achieve optimum printer performance.

Prog062198 Version1.1	MODEL 3600	/1.0.CODE,39,3
		/1 0.3 39 CODE
		/1.0.CODE,39,3

	1
	2
	3
ON	4
	OFF
	5

	CODE	CODE 3.0 / 1
	39	39
*PICKET FIELD*	*PICKETFIELD*	*PICKETFIELD* *PICKET FIELD*	*SUPPLIER* *SUPPLIER*

INTERMEC Corporation

Everett, WA 98203

2.5 / 1CODE 39 *PICKETFIELD* *PICKET FIELD* INTERMEC

6 7 8 1 2 3 4

ONOFF

5 6 7 8

3600M.025

3-8