Preventive Maintenance

2

3.Remove the media from the paper path and the ribbon (if installed) from the TTR supply and takeup hubs.

4.Use a cotton swab moistened with alcohol to remove any dirt, adhesive, or debris from the print surface on the bottom of the printhead.

Power

Alert

Empty/Pause

Feed/Pause

Intermec

3600

Thermal

 

printhead

3600M.012

5.Wait 5 to 10 seconds for the print surface to dry. Reload the media (and ribbon if used).

6.Engage the printhead by rotating the head lift lever counterclockwise until it locks in place.

7.If you are finished cleaning, install the media cover.

2-7

Page 39
Image 39
Genicom 3600 manual Thermal Printhead