Genicom 3600 manual Cleaning the Rollers and Tear Bar, To clean the rollers and tear bar

3600 Printer Maintenance Manual

Cleaning the Rollers and Tear Bar

Cleaning the platen roller and the tear bar preserves print quality by ensuring close contact between the media and the printhead. The TTR roller, liner roller, and media roller are cleaned in the same fashion to minimize general debris and to maximize their efficiency.

To clean the rollers and tear bar

1.Remove the media cover.

2.Raise the printhead by rotating the head lift lever clockwise until the printhead releases.

3.Remove the media from the paper path and the ribbon (if installed) from the TTR hubs.

4.Clean the rollers with a lint-free cloth moistened in isopropyl alcohol. Wipe the cloth over the rollers, rotating each roller so that you clean all of it.

Media roll roller

TTR roller

Power

Alert

Empty/Pause

Feed/Pause

Intermec

3600

		Platen
		roller
Tear	Liner
bar		3600M.013
	roller

5.Clean both sides of the tear bar with a lint-free cloth moistened in isopropyl alcohol. Remove all traces of dust, paper, and adhesive.

6.Reload the media (and ribbon if used) and then engage the printhead by turning the head lift lever counterclockwise until the printhead locks.

7.If you are finished cleaning, install the media cover.

2-8