Ozone Emission
The HP LaserJet 6P and 6MP printers do not use high-voltage corona wires in the electrophotographic process, and therefore, generate no measurable ozone gas (O3). These printers instead use charging rollers in the toner cartridge and in the print engine.
ENERGY STAR Computers Compliance
The HP LaserJet 6P and 6MP printers are designed to conserve electricity by dropping from 175 W while printing to 8 W when in the Power Save Mode. The instant-power-save/instant-on capability of these printers makes a standby mode unnecessary. For maximum energy conservation, Hewlett-Packard recommends that the printer be turned off when it will not be used within a few hours. With this new, power-saving design, both models of the printer qualify for ENERGY STAR Computers compliance. As an ENERGY STAR Partner, Hewlett-Packard has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
LED Safety
The infrared port on the front panel of the printer is classified as a Class 1 LED (Light Emitting Diode) device according to International Standard IEC 825-1 (EN 60825-1). This device is not considered harmful, but the following precautions are recommended:
∙If the printer requires service, contact an authorized HP service center.
∙Do not attempt to make any adjustment of the printer.
∙Avoid direct eye exposure to the infrared LED beam. Be aware that the beam is invisible light and cannot be seen.
∙Do not attempt to view the infrared LED beam with any type of optical device.
A-4 Printer Specifications