Changing Paper Size in Tray 2
1 Pull Tray 2 straight out of the printer and remove any paper.
2 Press the top of the green paper width guide toward the center of the tray. The guide should detach from the tray.
3 Align the pointer on the end of the guide with the desired paper size.
4 Insert the two left side tabs into the appropriate holes (A) and push back on the guide to the upright position (B), snapping the center tab into place.
For A4, Letter, Executive and B5 paper sizes, skip to step 7 on the following page. For Legal paper size continue with step 5 below.
5 Locate the green subtray at the back of Tray 2. Grasp the front corners of the subtray and pull straight up to remove.
Continue with step 6 on the following page.
EN
