Printing on Envelopes

Before you load envelopes in Tray 1, make sure they are undamaged and are not stuck together.

C a u t i o n

Never use envelopes with clasps, snaps, windows, coated linings, self-stick adhesives, or other synthetic materials. See Appendix B for media specifications.

1 Grasp Tray 1 by the two finger tabs and pull the top down. Pull out the plastic tray extender with the center finger tab.

2 Open the rear output tray by grasping the center finger tab and pulling the top down. Pull out the tray extender until it snaps into place. (This reduces envelope curling.)

3 Place envelopes against the left side of the tray, print-side up, with the postage-end in. Slide the envelopes into the printer as far as they will go without forcing them.

4 Slide the paper width guide to the left until it lightly touches the right side of the envelope stack.

5 Make sure the envelopes fit under the plastic tabs on the paper width guide and the left side of the tray.

3-12 Printing Tasks

EN