C

Connect Printer to a LocalTalk Network

N o t e

Your HP LaserJet 6P/6MP printer does not come with LocalTalk network cables. You must obtain cables separately. Use a standard LocalTalk network cable and connector kit, such as the HP LocalTalk Network Cable Kit. (See page 2-20 for ordering information.) You will need one connector kit for each printer on your network. Additionally, each Macintosh computer on your network requires its own connector kit.

Connect to the End of a Network

Figure C-1

1Turn the printer off. Insert the connector box cable into the LocalTalk port of the printer.

2Insert one end of the network cable into the connector box.

3If the connector box is not self-terminating, insert a terminating resistor into the connector box.

4Insert the other end of the cable into the last connector box on the network. (Remove the terminating resistor if necessary.) Turn the printer on.

EN

Connect Printer to a LocalTalk Network C-1

Page 124
Image 124
HP 6MP, 6p manual Connect Printer to a LocalTalk Network, Connect to the End of a Network