Installing the DOS Printing Software

 

The DOS printing software consists of the Remote Control Panel (RCP).

 

The RCP enables you to change printer settings if the DOS software

 

application does not support the printer feature you want to use. See

 

page 2-18 for RCP instructions.

 

Each DOS software application also requires a separate printer driver.

 

Please contact your DOS application vendor to obtain a printer driver.

 

If you are waiting to receive a driver for the HP LaserJet 6P/6MP

N o t e

 

printer, you can substitute a printer driver from another HP LaserJet

 

Printer (use the latest version available). These substitute drivers allow

 

you to use the HP LaserJet 6P/6MP printer but may not support all of

 

the printer’s features.

 

To install the DOS Remote Control Panel:

 

 

CD ROM Installation Instructions

1Insert the CD into the CD ROM drive:

2At the DOS prompt, type D: (this assumes that the CD ROM drive is D) and press [Enter] on the computer keyboard .

3At the D:> type INSTALL and press [Enter].

4Follow the instructions on the computer screen.

The printer setup is complete!

Diskette Installation Instructions

1Insert the diskette into the disk drive.

2At the DOS prompt, type A: (this assumes that the disk drive is A) and press [Enter] on the computer keyboard .

3At the A:> type INSTALL and press [Enter].

4Follow the instructions on the computer screen.

The printer setup is complete!

1 Printer Setup

EN

Printer Setup 1-17

Page 26
Image 26
HP 6MP, 6p manual Installing the DOS Printing Software, To install the DOS Remote Control Panel