Step 7. Attach the Power Cord
1 Locate the power On/Off button on the right side of the printer. Make sure the power is not On (button should be in the out position).
2 Open the power cord door at the back/right corner of the printer using the finger tab for leverage.
3 Connect the power cord securely to
the printer. Close the power cord door, while allowing the power cord to feed through the hole in the door. Connect the other end of the power cord to a grounded power strip or a power outlet.
4 Switch the printer on by pressing the On/Off button.
N o t e
Before printing you must install printer software. Go to Step 8. Install Printer Software on the following page.
EN