6Move the subtray to the rear position (C), aligning the tabs on the front sides of the subtray with the rear grooves. Press the subtray down until it snaps into place (D).
Continue here if not using Legal paper size.
7Press the top of the paper length guide toward the center of the tray. The guide should detatch from the tray.
8Align the pointer on the left of the guide (E) with the desired paper size. Insert the two front side tabs into the appropriate holes (F) and push back on the guide to the upright position, snapping the center tab into place (G).
9Load up to 250 sheets of paper in the tray. Keep the paper below the arrows on the paper length guide (H) in the rear of the tray. Make sure the paper is flat in the tray at all four corners. If needed, press on the clip lever (I) to raise the front left metal holder (J) so the paper will fit underneath.
10Slide Tray 2 back into the printer.
Tasks Printing 3
EN
Printing Tasks