Checking SIMM Installation
Follow this procedure to verify that the SIMM is installed correctly:
1The printer should return to a ready state when it is turned on (Ready light on). If the Error (back) light comes on, the SIMM may have been installed wrong. Check the error messages starting on page
2Print a self test by simultaneously pressing [Go] and [Job[Cancel].
3If you installed a memory SIMM, check the memory section on the self test and compare it with the self test printed previous to the SIMM installation. The new self test should include the new memory.
4If you installed a printer language/personality such as PostScript SIMM, check the Personalities section on the self test. This area should list the new printer language/personality.
EN