HP C410a, C410c Solution 5 Load paper in the input tray, To set your language and country/region

Models: C410c C410d C410b C410a C410e

1 264
Download 264 pages 51.2 Kb
Page 116
Image 116

Solve a problem

Chapter 12

If this did not solve the issue, try the next solution.

Solution 3: Check the connection between the product and computer

Solution: Check the connection between the product and computer.

Cause: The product and computer were not communicating with each other. If this did not solve the issue, try the next solution.

Solution 4: Check that the cartridges are installed properly and have ink

Solution: Check that the cartridges are installed properly and have ink.

For more information, see:

Work with cartridges

Cause: There might have been a problem with one or more of the cartridges. If this did not solve the issue, try the next solution.

Solution 5: Load paper in the input tray

Solution: Load paper in the input tray.

For more information, see:

Load media

Cause: The product might have been out of paper.

The wrong measurements are showing in menus on the display

Solution: Change the country/region setting.

NOTE: You will be prompted to set both the language and the country/region settings, by using the following procedure.

To set your language and country/region

1.Press Setup.

2.Press the down arrow button to highlight Preferences, and then press OK.

3.Press the down arrow button to highlight Set Language, and then press OK.

4.Press the down arrow button to scroll through the languages. When the language you want to use is highlighted, press OK.

5.When prompted, press the down arrow button to highlight Yes for confirmation, and then press OK.

The Preferences menu reappears.

6.Press the down arrow button to highlight Set Country/Region, and then press OK.

114 Solve a problem

Page 116
Image 116
HP C410a, C410c, C410d manual Solution 5 Load paper in the input tray, Wrong measurements are showing in menus on the display