HP C410d, C410c Minimum System Checks screen appears, Red X appears on the USB connect prompt

Models: C410c C410d C410b C410a C410e

1 264
Download 264 pages 51.2 Kb
Page 117
Image 117

7.Press the down arrow button to scroll through the countries/regions. When the country/region you want to use is highlighted, press OK.

8.When prompted, press the down arrow button to highlight Yes for confirmation, and then press OK.

Cause: You might have selected the incorrect country/region when setting up the product. The country/region you select determines the paper sizes shown on the display.

The Minimum System Checks screen appears

Solution: Click Details to see what the specific problem is, and then correct the problem before attempting to install the software.

Cause: Your system did not meet the minimum requirements to install the software.

A red X appears on the USB connect prompt

Solution: Check that the product is turned on, and then try the USB connection again.

Solve a problem

To retry the USB connection

1.Verify that the USB cable is set up properly as follows:

Unplug the USB cable and plug it in again or try plugging the USB cable into a different USB port.

Do not attach the USB cable to a keyboard.

Verify that the USB cable is 3 meters (9.8 feet) or less in length.

If you have several USB devices attached to your computer, you might want to unplug the other devices during the installation.

2.Unplug the product power cord, and then plug it in again.

3.Verify that the USB cable and power cord are plugged in.

Setup troubleshooting

115

Page 117
Image 117
HP C410d, C410c Minimum System Checks screen appears, Red X appears on the USB connect prompt, To retry the USB connection