HP C410b, C410c Case B Set up the HP Photosmart with DSL, To set up the HP Photosmart with DSL

Models: C410c C410d C410b C410a C410e

1 264
Download 264 pages 51.2 Kb
Page 23
Image 23

When the phone rings, the HP Photosmart will answer automatically after the number of rings you set in the Rings to Answer setting. Then it will begin emitting fax reception tones to the sending fax machine and receive the fax.

Case B: Set up the HP Photosmart with DSL

If you have a DSL service through your telephone company, use the instructions in this section to connect a DSL filter between the telephone wall jack and the HP Photosmart. The DSL filter removes the digital signal that can interfere with the HP Photosmart, so the HP Photosmart can communicate properly with the phone line. (DSL might be called ADSL in your country/region.)

NOTE: If you have a DSL line and you do not connect the DSL filter, you will not be able to send and receive faxes with the HP Photosmart.

Figure 3-2 Back view of the HP Photosmart

1Telephone wall jack

2DSL filter and cord supplied by your DSL provider

3Use the phone cord supplied in the box with the HP Photosmart to connect to the "1-LINE" port

To set up the HP Photosmart with DSL

1.Obtain a DSL filter from your DSL provider.

2.Using the phone cord supplied in the box with the HP Photosmart, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the HP Photosmart.

NOTE: If you do not use the supplied cord to connect from the telephone wall jack to the HP Photosmart, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office.

Set up the HP Photosmart for faxing

21

Finish setting up the HP Photosmart

Page 23
Image 23
HP C410b, C410c, C410a, C410d, C410e manual Case B Set up the HP Photosmart with DSL, To set up the HP Photosmart with DSL