HP C410b, C410c, C410a, C410d, C410e manual Solution 5 Clear the memory of the product

Models: C410c C410d C410b C410a C410e

1 264
Download 264 pages 51.2 Kb
Page 173
Image 173

company has assigned your number a double ring pattern, make sure Double Rings is selected as the Distinctive Ring setting.

NOTE: The product cannot recognize some ring patterns, such as those with alternating short and long ringing patterns. If you are having problems with a ring pattern of this type, ask your phone company to assign a non-alternating ring pattern.

If you are not using a distinctive ring service, make sure that the Distinctive Ring setting on the product is set to All Rings.

Cause: You had a special ring pattern for your fax phone number (using a distinctive ring service through your telephone company), and the Distinctive Ring setting on the product did not match.

If this did not solve the issue, try the next solution.

Solution 4: If you do not use a distintive ring service, make sure the Distinctive Ring setting is set to All Rings

Solution: If you are not using a distinctive ring service, make sure that the Distinctive Ring setting on the product is set to All Rings.

Cause: The Distinctive Ring setting was not set to All Rings (and you were not using a distinctive ring service).

If this did not solve the issue, try the next solution.

Solution 5: Clear the memory of the product

Solution: If Backup Fax Reception is enabled and there is an error condition on the product, the memory might become full of faxes that have not yet been printed and the product will stop answering calls. If an error condition exists that is preventing the product from printing faxes, review the display for information on the error condition. Make sure:

The product is on. Press the On button to turn on the product.

The product is set up correctly for faxing. See the printed documentation for more information.

There is paper loaded in the input tray.

There is no paper jam.

The print carriage is not stalled or blocked. Turn off the product, remove any objects that are blocking the print cartridge carriage (including any packing materials), and then turn on the product again.

The print cartridge door is closed. If not, close the print cartridge door, as shown below:

Solve a problem

Fax troubleshooting

171

Page 173
Image 173
HP C410b, C410c, C410a, C410d, C410e manual Solution 5 Clear the memory of the product