![](/images/new-backgrounds/1152399/152399387x1.webp)
Solve a problem
Chapter 12
•Product messages
•File messages
•General user messages
•Paper messages
•Power and connection messages
•Ink cartridge and printhead messages
Product messages
The following is a list of
•Firmware revision mismatch
•Memory is full
•Photo tray problem
•Photo tray cannot engage
•Photo tray cannot disengage
•Missing HP Photosmart Software
Firmware revision mismatch
Solution: Contact HP support for service.
Go to: www.hp.com/support.
If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Cause: The revision number of the product firmware did not match the revision number of the software.
Memory is full
Solution: Try making fewer copies at a time.
Cause: The document you were copying exceeded the memory of the product.
Photo tray problem
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
•Solution 1: Load more paper in the photo tray
•Solution 2: Make sure paper is loaded correctly in the photo tray
•Solution 3: Remove excess paper from the photo tray
•Solution 4: Make sure the sheets of paper are not stuck together
•Solution 5: Make sure the photo paper is not curled
•Solution 6: Load one sheet of paper at a time
Solution 1: Load more paper in the photo tray
Solution: If the photo tray is empty or there are only a few sheets remaining, load more paper in the photo tray. If there is paper in the photo tray, remove the paper,