HP C410c, C410a, C410d, C410b, C410e Wired Ethernet network, To connect the product to the network

Models: C410c C410d C410b C410a C410e

1 264
Download 264 pages 51.2 Kb
Page 15
Image 15

Related topics

Install the software for a network connection

Wired (Ethernet) network

Before you connect the HP Photosmart to a network, make sure you have all of the required materials.

￿A functional Ethernet network that includes a router, switch, or hub with an Ethernet port.

￿CAT-5 Ethernet cable.

Although standard Ethernet cables look similar to standard telephone cables, they are not interchangeable. There is a different number of wires in each one, and each has a different connector. An Ethernet cable connector (also called an RJ-45 connector) is wider and thicker and always has 8 contacts on the end. A phone connector has between 2 and 6 contacts.

￿ A desktop computer or laptop on the same network.

NOTE: The HP Photosmart supports networks with automatic speed negotiation capable of 10 or 100 Mbps.

To connect the product to the network

1.Remove the yellow plug from the back of the product.

2.Connect the Ethernet cable to the Ethernet port on the back of the product.

Add the HP Photosmart to a network

13

Finish setting up the HP Photosmart

Page 15
Image 15
HP C410c, C410a, C410d, C410b, C410e manual Wired Ethernet network, To connect the product to the network